2Book Connecting Cover Comic Book Frame UV Safe Museum Edition
Versatility, Quality, Protection. All in One Frame!
This is the perfect frame for displaying two comic books with connecting cover artwork side by side, or...
-If you have a comic book with wraparound art (art covers the front and back covers) you can simply open it up and display it perfectly in this frame.
-How about those Treasury Edition large format comics that we all love but have a hard place storing them? Well they fit perfectly in this frame too!
-Have other large format comic books like TMNT (1984), Vampirella(1979), Conan(1974) or the recent Batman Damned from DC Black Label?
-How about magazines like Sports Illustrated, Playboy, Mad, Heavy Metal or Time?
The 2Book Connecting Cover Frame works GREAT for all of those too!
The wood frame is CNC machined for consistent accuracy and is cut from one solid piece of material! Not pieced together with glue, screws or nails like other frames, what does this mean for you?....DURABILITY!
The heavy duty Black Powder Coat finish is another characteristic that makes our frames extra special! No dry or rough edges, no chemical off-gassing from paint, just a baked on durable and beautiful high quality finish on high quality frames for your high quality comic books!
The rear load design makes positioning and aligning your comics together inside the pocket of the frame much easier*. Similar to most other frames the Connecting Cover Frames come with a clear front and a backer to hold your works of art in place inside the frame. This is our Museum Edition Frame which means that for the front piece you get a 99% UV Blocking** crystal clear piece of Museum Grade acrylic(no glass to break). The black plastic backer board is also acid free, will not off-gas and is safe to come in contact with your comic book!
Multiple Integrated keyhole slots routed into the back of the frame make it easy and safe to hang this frame either horizontally or vertically to properly display whatever it is you want to put inside.
***Be sure to select either a "Standard Pocket" for comics or artwork or a "Deep Pocket" for magazines, Treasury Comics or any books thicker than a standard comic book.
15.9" by 12.6" (overall)
The pocket size of the frame (where the books mount into) is 13.8" by 10.6"
The front window opening (area where you see the books) is 13.3" by 10.2"
*Installation Tip- place the frame face down on a flat surface and place the clear acrylic front into the frame pocket. Then position your comic books face down on the acrylic front (be sure to have them laid out correctly first so that the artwork will be in order when you look at them from the front of the frame). Line up the comics as best as possible making sure they are nice and tight together (no gaps between them) as well as the entire group being centered in the frame pocket. When you have them where you want them, gently place the black backer over them and swivel the clips to hold the backer in place. At this point you may have to either slightly snug the screws with a screwdriver if the clips are loose and do not stay in place. Or if the clips are too tight and you cannot get the clip to slide over the backer simply loosen the screw slightly until you can get it into place (slightly re-tightening the screw may be necessary after this). Now you can check out your display and see how it looks but do not get frustrated if it is not perfect or if the artwork is not lining up perfectly, you will most likely have to take the backer back off the frame and do some adjusting until you are happy with the outcome!
2 Reviews Hide Reviews Show Reviews
Purchased frame for a treasury size comic; perfect fit and easy install
Perfect. Will protect your books and make them stand out!